Smittybilt 812201 Vaulted Security Glove Box User Manual download pdf

For Technical Support/Warranty Information please call 310-762-9944

Smittybilt, 400 West Artesia Blvd,Compton, CA 90220

Installation Instructions

Vaulted Security Glove Box

97-06 Wranglers (Part # 812201)

NOTE: Carefully read entire instructions thoroughly before

attempting to install this part. Drilling is required. (Optional)

Parts Included Qty Tools Needed

Vaulted Glove Box 1

Phillips Screwdriver

Neoprene Strip 1

Drill

Door Drop Stop Bracket 1

Drill Bit Set

Wing Nut 2

Nylon Locking Nut 4

Washer 4

Step 1: Carefully remove the factory glove box from vehicle by gently pulling forward on the plastic

tab on the right side until the tab clears the dash and the box rotates out all the way or by

releasing the holding strap. (Fig 1)

Step 2: Remove the eight Phillips screws that attach the dash to the steel framework. Now remove the

factory lock catch at the top of the glove box opening by removing the two screws. (Save all screws

use later)

Note

: Remember the factory screw mounting pattern, you will use the same pattern later.

(Figure 1) (Figure 2)

1 2 3

For Technical Support/Warranty Information please call 310-762-

Page 2

For Technical Support/Warranty Information please call 310-762-

Page 3

For Technical Support/Warranty Information please call 310-762-

No comments

Smittybilt 812201 Vaulted Security Glove Box User Manual