Smittybilt 869000 Easy Install Billet Grille User Manual download pdf

For Technical Support/Warranty Information please call 310-762-9944

Smittybilt, 1600 Walnut Parkway, Rancho Dominguez, CA 90220

Installation Instructions

Easy Install Billet Grille (Part # 869000)

1997-2006 Jeep Wrangler

NOTE: Carefully read entire instructions thoroughly before

attempting to install this part.

TOOLS REQUIRED

-- Phillips Screw Driver

-- 4mm wrench

INCLUDED COMPONENTS

1 – Billet Grille (7 pieces)

21 – Metal Brackets

21 – M4 x20mm Phillips Screws

21 – M4 Flange Nuts

Figure 1 – Included Hardware

INSTALLATION INSTRUCTIONS

1. Inspect product and check components with items listed above.

2. Pop Hood. Position the lower Billet Grille onto grille shell cavity (Figure 2).

ure 2

–

Fron

View of

ositionin

lower Billet Grille

3. Loosely attach the Billet Grille by holding the Metal Brackets behind factory grille shell and inserting the Phillips

Screws (from the front) through the Billet Grille holes and Metal Brackets, secure them with Flange Nuts

provided (Figure 3).

Figure 3 – Rear view of vehicle’s shell; Billet Grills attached with Metal Brackets and Flange Nuts

4. Repeat Steps 4 and 5 for top section of Billet Grille.

5. Once the Billet Grilles are loosely attached, center them and tighten all Phillips Screws at the same rate.

1 2

For Technical Support/Warranty Information pl

Page 2

For Technical Support/Warranty Information pl

No comments

Smittybilt 869000 Easy Install Billet Grille User Manual