Smittybilt JB48-F FRONT BUMPER User Manual download pdf

For Technical Support/Warranty Information please call 310-762-9944

Smittybilt, 1600 Walnut Parkway, Rancho Dominguez, CA 90220

Installation Instructions

FRONT BUMPER (Part # JB48-F)

07 JEEP WRANGLER JK

PARTS LIST

1 Front Bumper

2 Brackets

8 12MM X 35MM bolts

8 12MM nylon lock nuts

12MM washers

PROCEDURE:

1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ

INSTRUCTIONS CAREFULLY.

2. Unplug the bumper lights electrical connections (Fig 1)

3. Remove front factory bumper by removing the eight mounting bolts with a 17MM socket

wrench (Fig 1)

4. Install the new bumper brackets as shown in photos. Note that the bracket faces rearward

and the forward facing holes (those the mounts bolt onto the frame) are horizontal, and those

the bumper mounts to are vertical. (Fig 2)

5. Install the 12MM bolts and locking nuts to the mounts but leave finger tight to allow for

adjustment

6. Install the 12MM bolts and locking nuts to the bumper and the mount.

7. Adjust the bumper and tighten all the bolts. (Fig 3)

Fig 1

Bumper light plug

Four mounting bolts

per side

1 2

Page 1

For Technical Support/Warranty Information ple

Page 2

For Technical Support/Warranty Information ple

No comments

Smittybilt JB48-F FRONT BUMPER User Manual